Fire Fighting Training Courses:

1. Conduct Basic Fire Fighting (1 Day)

This course is required by the Labor department for all companies.

This is your basic Fire Fighting in the workplace. Theory and Practical is done.

The Modules that we cover are the following:

  • Deal with Fires
  • Identify type of Fire
  • Select Fire fighting equipment
  • Monitor Fire
  • Retreat and handover
  • Report on record the status of Fire.

2. Advanced Fire fighting (1 week)

This course is to enable you to have the basic background before you further your studies in Fire 1 & Fire 2.

The modules that we cover both Theory and Practically:

  • Introduction to Fires
  • Fires
  • Causes and Prevention of fires
  • Detecting Fires
  • Preparing for Fires

3. Hazmat (1 week)

Hazardous Material Handling:

This course helps you to identify the different chemicals that is spilled and how to handle the different chemicals.

The following modules are covered both Theory and Practically:

  • Introduction
  • Classes of Chemicals
  • Personal Protective Equipment
  • Material Safety Data Sheets
  • Self Audits
  • Different Hazardous Material
  • Incident and other emergencies
  • Properties and effects of Hazardous Materials
  • Transportation of Hazardous Materials
  • Recognizing and identifying
  • Implementing a Response
  • Scene Safety and Control
  • Response priorities and actions
  •  Decontamination techniques
  •  Terminating the incident

First Aid Training Courses:

1. Our Career Development Program (4 weeks)

This course is ideal for Students that would Like to study further and go into ambulance training or into Fire fighting.Prepares a candidate for further studies. Theory and Practical are done in all courses.

 Includes the following:

  • First Aid Level 3  (2 weeks)
  • Hazmat  (1 week)
  • Advanced Fire Fighting (1 week)

2. Perform Basic Life Support and First Aid Procedures (2 Days}

Required by the Department of Labor for the workplace.Includes the following Modules:

  • Emergency Scene management
  • Elementary Anatomy and Physiology
  • Emergency Situations
  • First Aid Procedures
  • Treat common Injuries
  • Theory & Practical done in all courses

3. Provide first Aid as an advanced first responder (2 weeks)

This is your requirement before you do Basic Ambulance or if you would just like a more advanced course on First Aid.Covers all your basic first aid to child birth and lots more:

  • Principles of Advanced Primary Emergency Care
  • Preparing to deal with Emergencies
  • How to manage an emergency scene
  • Anatomy and Physiology
  • Primary Emergency Life Support
  • Managing shock

Heavy Machinery Operator Training Courses start every Monday:

The following Operator Courses are done at our Premises:

1. Counter Balance Lift Truck (Forklift) Code F1 (3T) Code F2 (7T) Code F3 (15T)

This is a 1 week course Consists of 1 Day Theory, 3 Days Practical and 1 Day Assessments

The following Modules are covered:

  • Lift truck and attachment identification
  • Parts & Functions
  • Principles of Operation
  • Safety rules
  • Daily checks
  • Refueling & changing batteries
  • Mechanical appreciation
  • Log books
  • Load recognition
  • Maneuvering, clearances & practical driving.

2. 360 Degrees Excavator, Tractor Loader Backhoe, Articulated Dump Truck, Front End Loader, Mobile Crane

These courses are done over 2 weeks at our Premises.

The course consists of 2 Days theory, 7 Days practical and 1 Day Assessments.The following Modules are covered:

  • Parts & Functions
  • Machine Safety
  • Daily Checks
  • Principles of Operation
  • Mechanical Appreciation
  • Load Capacity and Range
  • Signals
  • Practical Operation

Occupational Health and Safety Training Courses:

1. Safety Officer 2 Weeks

Safety Health and environment Management (1 Week)

We cover the following Modules:

  • Basic Principles of SHE
  • OHS Legislation
  • Technical Safety Aspects
  • Occupational Health
  • Environmental Management
  • Management Systems

2. Hazard Identification and Risk Assessment (1 Day)

We cover the following Modules:

  • Requirements of Safety
  • Preparing to  Identify Hazards
  • Identify Hazards
  • Remedial and Follow up Action

3. Contractors Safety management (1 Day)

We cover the following Modules:

  • Contractors Safety Analysis
  • Safety Policy
  • Contractor qualification Procedure
  • Contractor Legal Implications
  • Control of Contractors
  • Contractor Specific requirements
  • General Safety
  • Accident Recording
  • Safety Policies

4. Incident Accident Investigation in the workplace (1 Day)

We cover the following Modules:

  • Legal and Organisational Requirements
  • Gathering Information
  • Completing Reports

5. Mines Health & Safety (1 Day)

We cover the following Modules:

  • Mines Health & Safety Act 29 of 1996

6. Oshas 18001 (3 Days)

We cover the following Modules:

  • Policies
  • Identify and control Hazards
  • Identify  people and resources
  • Prepare a statement of Responsibilities
  • Schedule Inspections
  • Developing Plans
  • Developing training plans
  • Developing plans to investigate accidents
  • Develop a strategy to involve workers
  • Evaluating your program
  • Return to work program

7. Safety File

How to draw up your own safety file.

8. She Rep (1 Day)

We cover the following Modules:

  • Identify Hazards
  • Evaluate and report Hazards
  • Preventative Measures & training
  • Legislation
  • Organising OHS Information

Welding, Scaffolding & Rigging Training Courses:

1. Basic rigging and slinging (1 Day)

We cover the following modules in basic Rigging and slinging. Theory and Practical.

  • Introduction
  • Identify and selecting lifting equipment
  • Different load requirements
  • Unsafe and defective equipment
  • Different Slings and Hooks etc
  • Planning
  • Practical training.

2. Advanced rigging and slinging (1 week)

We cover the following modules in Advanced rigging. 2 Days Practical and 2 Days Theory and 1 Day Assessment

  • Lifting equipment
  • Plan and prepare to lift a load
  • Slings and Bolts
  • Lifting and moving a load
  • Maintaining and storing quipment
  • Practical training

3. Working on Heights with fall arrest (2 Days)

The following modules are covered in Working on heights. Theory and Practical training is done.

  • Introduction
  • Fall arrest equipment and regulations
  • Inspect, assemble, and store fall arrest equipment
  • select suitable anchor plants
  • Use Fall arrest systems with a double Lanyard
  • Pre-installed vertical and horizontal life lines
  • Practical training

4. Scaffold erecting (2 Days)

The Following modules are covered and both theory and practical training is done

  • Types of access scaffolding
  • Inspector roles and responsibilities
  • Drawings
  • Inspect and Handover
  • Practical training

5. Scaffold inspecting (1 Day)

The Following modules are covered and both theory and practical training is done.

  • Types of access scaffolding
  • Inspector roles and responsibilities
  • Drawings
  • Inspect and Handover
  • Practical training

6. Different welding Courses available

We cover the following welding courses. Theory and Practical.

  • Basic arc welding 2 weeks
  • Basic Co2 Welding 2 weeks

Please contact the offices for more details on these courses

For Corporate:

More welding, scaffolding, and rigging courses are available, as well as the above, can be done at a venue of your choice. Days of training may vary to the above  depending on what courses we will be doing. Please feel free to contact our offices for more details.